VU-LS-D台式自动锁螺丝机

l         Automatic bench locking screw machine instal the XY axis on the desktop , promoting the screwdriver by hand in order to achieve the scope of the table to move freely. Move down the screw driver and locking screw after the screwdriver aim at the location and finish the work of lock screws.

工作台式自动锁螺丝机是在工作台面上加装x-y轴，用手推动电批以实现在台面范围 的自由移动。当电批对准位置后向下移动即完成锁螺丝的工作。

l         The x, y and z-axis of this machine use the linear bearing structures , the movement is easy

本机的x、y和z轴均采用直线轴承结构，运动轻松自如。

l         Screw supply system use the mechanical pars with low noise, low power, fast smooth feeding.                         供螺丝系统采用机械式选料，低噪声、低耗能，供料平稳快捷。

l         The parts put on the desktop directly, use of a pre-board, to aim at position automatically.                                   工件直接放在工作台上，利用预先做好的治具板，自动定位。

l         When the lock screw, as long as the pins will be at the hole of governing board and push down the screwdriver continuously, and finish all the work of locking screws

锁螺丝时，只要将定位销对准治具板孔连续下按，即可完成全部锁螺丝工作

l         Particularly suited to the same specifications, multiple screw work pieces                                特别适合于同一规格、多颗螺丝 工件。