佛山市苏尔泰电器有限公司

产品介绍 点火器是专为气体焊接、切割及加热作业而设计。它是由燃气助燃装置、流量减压装置、气体控制系统、点火源组成。其主要功能是在焊割作业间断时将焊割炬挂在点火器的支架/挂钩上即可关闭工作气源，当需要恢复作业时，提取焊割炬气源自动接通，此时只要将焊割炬火口靠近点火器火源即可实现点火(点火源5-8秒自动熄灭）。因此，使用本点火器不但节能，降低焊割炬的无效燃烧时间，减少由焊接产生有害污染物质 （电焊尘、氮氧化物、一氧化碳、乙炔等），而且使焊割作业更方便、安全，同时也可提高工作效率。 使用行业 灯饰照明、制冷(空调冰箱）、管路件焊接、发热管、电热管、水暖卫浴、五金加工、医疗器械、矿山、蓄电池、自行车、汽车水箱、玻璃等行业大量应用到的氧焊(风焊/气焊/钎焊/铜焊/银铜焊)工艺 EN06氧焊节能快速点火器主要技术参数 1．使用压力范围0-1.0Mpa 2．使用气体：氧气、乙炔、丙烷、煤气、瓦斯（丁烷）等气体。 3．节约用气：30%-50% 4．型式：机械式/万用电控式 5．点火方式：间断电弧/常明火 6．节能器工作温度-5℃—80℃ 7．电压：AC220V/AC12V/DC1.5 电话：0757-28626789 Description A practical add on to your gas welding equipment(gas economiser) . For Oxygen/Acetylene torch systems/handles only.Heres how it works: A double shutoff valve with a pilot flame or a spark ignite.designed for quick shut-shut off and easy restart of your working torch flame. The torch flame is automatically extinguished and the gas flow discontinued by place your torch handle on the conveniently located hanger hook. To reignite the working flame, lift torch handle from the hook and place the tip close to the pilot flame. The gas saver allows you to safely set your torch down while adjusting your panels, quickly re-light without having to readjust your torch. bracket kit for welding table or cart mounting. Save additionally up to 30% of your normal tank consumption by installing today! 1.Surely and easily ignition by spark igniter. 2.Oxygen and combustible gas can be turned on or off firmly. 3.When the torch falls off from the hanger,gas will stop automatically.