点击图片查看原图
英国GRIMM格林进口液化石油气泵概述：
进口液化石油气泵,主要用于输送液化石油气、二甲醚、氯甲烷 、环氧乙烷、丙烷、丙烯、丁二烯、异丁烯、甲醇等各种性质类似的挥发性液体及石油产品，特别使用于液化石油气的装卸车，钢瓶灌装，车间供料等工作场合。该泵为容积式叶片泵，其结构先进，定子曲面由复合曲线组成，两端采用机械密封，各固定配合端面均采用“O”型密封圈，旋转运动的配合部件均采用金属相对应非金属，具有使用安全可靠、一机多用的功能。
英国GRIMM格林进口液化石油气泵工作原理：
进口液化石油气泵型式为容积式叶片泵，工作靠叶片离心滑动，流量与轴的转速有关，定子内曲面采用国内独创的复合曲线制成，定子与转子、挡板、叶片组成十个密封腔体，由于定子曲面是复合曲线，当转子转动时进口腔体积逐渐增大，并形成负压产生吸力，从而将油液吸入，当转子旋转一定角度后，容积截面逐渐减小，从而将油液压出，在吸油腔与压油腔之间有一封油块把吸油腔与压油腔隔开。叶片靠离心力和两挡板结构从而与定子内曲面紧密贴合，使泵在额定状态下正常工作。
英国GRIMM格林进口液化石油气泵技术参数：
流 量：2-80m3/h
功 率：1.5-18.5kw
转 速：600r/min、780r/min
口 径：25-100mm
压 差：0.4～0.5MPa
温度范围：-40℃～40℃
工作压力：1.6Mpa
材 质：铸铁、不锈钢
英国GRIMM格林进口液化石油气泵应用领域：
主要用于输送液化石油气、二甲醚、氯甲烷 、环氧乙烷、丙烷、丙烯、丁二烯、异丁烯、甲醇等各种性质类似的挥发性液体及石油产品，特别使用于液化石油气的装卸车，钢瓶灌装，车间供料等工作场合。
UK GRIMM imported LPG pump summary:
imported LPG pumps are mainly used to transport volatile liquids and petroleum products such as liquefied petroleum gas, two methyl ether, chloromethane, propylene oxide, propane, propylene, butadiene, isobutene, methanol and other volatile liquids and petroleum products, especially in liquefied petroleum gas loading and unloading trucks, steel bottle filling, and workshop feeding. The pump is a volumetric vane pump, its structure is advanced, the stator surface is composed of composite curves, mechanical seals are adopted at both ends, and the "O" sealing ring is used for each fixed end face. All the rotating components are metal relative to non metal. It has the function of safe and reliable use and multi use.
UK GRIMM imported LPG pump working principle:
The type of imported liquefied petroleum gas pump is a volume type vane pump, which depends on the centrifugal sliding of the blade. The flow is related to the rotational speed of the shaft. The inner surface of the stator is made of the original composite curve. The stator is composed of ten sealed cavities with the rotor, the baffle and the blade, because the stator surface is the complex curve, when the rotor is rotated, the inlet body is made. The product will gradually increase and form a suction pressure to produce the suction, and then the oil is sucked into. When the rotor rotates a certain angle, the volume section gradually decreases, thus the oil hydraulic out, and there is an oil block between the oil suction cavity and the pressure chamber to separate the oil suction cavity from the pressure chamber. The blade is tightly attached to the inner surface of the stator by centrifugal force and two baffle structure, so that the pump can work normally under rated condition.
UK GRIMM imported LPG pump technical parameter:
Flow: 2-80m3/h
Power: 1.5-18.5kw
Speed: 600r/min, 780r/min
Caliber: 25-100mm
Pressure difference: 0.4 ~ 0.5MPa
Temperature range: -40 C ~ 40 C
Work pressure: 1.6Mpa
Material: cast iron and stainless steel
UK GRIMM imported LPG pump application area:
It is mainly used to convey volatile liquids and petroleum products such as liquefied petroleum gas, two methyl ether, chloromethane, propylene oxide, propane, propylene, butadiene, isobutene, methanol and other volatile liquids and petroleum products, especially in the loading and unloading vehicles of LPG, steel bottle filling, and workshop feeding.