点击图片查看原图
英国GRIMM格林进口电动隔膜泵概述：
进口电动隔膜泵，采用摆线针轮减速机传动，通过曲轴滑块机构带动双隔膜作往复运动，使工作腔容积发生交替变化从而达到将液体不断地吸入和排出。同时，近年来由于隔膜材质取得了突破性的进展，大大地延长隔膜的使用寿命，因此被越来越广泛地替代部分离心泵、螺杆泵来应用于石化、陶瓷、冶金等行业。
英国GRIMM格林进口电动隔膜泵工作原理：
电机与减速机通过轴承箱带动曲轴旋转，由变向机构将曲轴端的圆周运动转变成滑动杆的轴向移动，再带动隔膜往复运动。在左右两个泵腔内，装有上下四个单向球阀、隔膜的运动造成工作腔的容积的改变，迫使四个单向球阀交替地开启和关闭，从而将液体不断地吸入和排出。
英国GRIMM格林进口电动隔膜泵性能特点：
进口电动隔膜泵既能抽送流动的流体，又能输送一些不易流动的介质，具有自吸泵、杂质泵等输送机械的许多优点，并可调节流量。
1、使用方便，不需灌饮用水，工作可靠，只需通电即可使用。
2、电动隔膜泵本身无轴封，大大延长了使用寿命。
3、由于隔膜将输送介质和传动机械件分开，所以介质绝对不会向外泄露。
4、结构简单，损件少，安装维修方便。泵输送的介质不会接触到泵的连杆、轴承等运动部件，从而减小部件磨损和性能下降。
5、可输送较粘稠液体(10000厘泊以下)。
6、流动宽敞，通过性能好，允许通过zui大颗粒直径9.4mm，抽送泥浆、杂质式，对泵磨损甚微。
7、工作环境范围：5～65℃，输送介质范围：-20℃～150℃。
8、泵体介质过流部分，可根据用户要求不同，分为铸钢、不锈钢、铝合金、氟塑料等。
9、根据介质不同，隔膜可分为氯丁橡胶、氟橡胶、丁晴橡胶、聚四氟乙烯、特氟龙等。
10、隔膜泵电机可分为普通电机、防爆电机、变频电机和电磁调速电机。
英国GRIMM格林进口电动隔膜泵技术参数：
zui大流量：12.8-480L/min
zui大扬程：40-70m
出口压力：0.4-0.7MPa
口 径：10-125mm
转 速：1450r/min
电机功率：0.55-5.5kw
zui大虹吸高度(干抽或湿抽)：3-6m
zui大输送固体颗粒：2.5-9.4mm
每往复流量：0.15-7.6L
zui大往复速度：63-85cpm
英国GRIMM格林进口电动隔膜泵主要用途：
1、各种剧毒、易燃、易挥发液体。
2、各种强酸、强碱、强腐蚀液体。
3、可输送较高温度的介质150℃。
4、作为各种压滤机前级送压装置。
5、热水回收及循环。
6、油罐车、油库、油品装卸。
7、泵吸泡菜、果酱、土豆泥、巧克力等。
8、泵吸油漆、树胶、颜料粘合剂。
9、各种瓷器釉浆、水泥灌浆、灰浆、泥浆。
10、各种橡胶浆乳胶、有机溶剂、填料。
11、用泵为油轮驳船清仓吸取仓内污水及剩油。
12、啤酒花及发酵粉稀浆、糖浆、糖蜜。
13、泵吸矿井、坑道、隧道、下水道中污水、沉淀物。
14、各种特殊介质的吸送。
UK GRIMM imported electric diaphragm pump summary:
imported electric diaphragm pump, the cycloid reducer drive, through the crank slider mechanism driven by double diaphragm reciprocating motion, so that the working chamber volume change alternately so as to achieve the continuous suction and discharge liquid. At the same time, in recent years due to the material of diaphragm achieved a breakthrough, greatly prolong the service life of the diaphragm, so it is more and more widely to replace part of centrifugal pump, screw pump used in petrochemical, ceramics, metallurgy and other industries.
UK GRIMM imported electric diaphragm pump working principle:
The motor and the reducer drive the crankshaft through the bearing box, and the circumferential movement of the crankshaft end is changed into the axial movement of the sliding rod by the direction changing mechanism, and then the reciprocating movement of the diaphragm is driven. In the two movement of the pump cavity, four one-way valve, diaphragm is provided with a working cavity caused by the volume change, forcing the four one-way valve alternately opened and closed, and the liquid suction and discharge continuously.
UK GRIMM imported electric diaphragm pump performance characteristics:
imported electric diaphragm pump can pump fluid flow, but also easy to transport some of the flow medium, has many advantages such as self suction pump, pump and other impurities conveying machinery, and can adjust the flow.
1. Easy to use, no need to drink water, the work is reliable, just need to electrify can use.
2. The electric diaphragm pump itself has no shaft seal, which greatly prolongs the service life.
3. Because the diaphragm will transport medium and drive mechanical parts separate, so the media will not leak out.
4. Simple structure, less damage, convenient installation and maintenance. Pumps transport medium will not touch the pump connecting rod, bearings and other moving parts, thereby reducing parts wear and performance degradation.
5. Can carry more viscous liquid (below 10000 CPS).
6. Wide flow and good performance, to allow the maximum particle diameter of 9.4mm, pumping mud and impurities, little wear on the pump.
7. The working environment range: 5~65 degrees, the transport medium range: -20 ~ 150 DEG C.
8, Pump body medium flow part, according to user requirements are different, divided into cast steel, stainless steel, aluminum alloy, fluorine plastic, etc..
9. According to the different media, the diaphragm can be divided into chloroprene rubber, fluorine rubber, nitrile rubber, PTFE, Teflon etc..
10. Diaphragm pump motor can be divided into ordinary motors, explosion-proof motors, frequency conversion motor and electromagnetic speed regulating motor.
UK GRIMM imported electric diaphragm pump technical parameter:
Maximum flow: 12.8-480L/min
Maximum lift: 40-70m
Outlet pressure: 0.4-0.7MPa
Caliber: 10-125mm
Speed: 1450r/min
Motor power: 0.55-5.5kw
Maximum siphon height (dry or wet):3-6m
The largest transport solid particles: 2.5-9.4mm
Per reciprocating flow: 0.15-7.6L
Maximum reciprocating speed: 63-85cpm
UK GRIMM imported electric diaphragm pump main use:
1. A variety of highly toxic, flammable, volatile liquids.
2. All kinds of strong acid, alkali and strong corrosive liquid.
3. Can transport high temperature medium 150 degrees.
4. As the front pressure feeding device of various press filters.
5. Hot water recycling and recycling.
6. Oil tank, oil depot, oil loading and unloading.
7. Pump kimchi, jam, mashed potatoes, chocolate, etc..
8. Pump paint, gums, pigments, adhesives.
9. All kinds of porcelain glaze slurry, cement grouting, mortar, mud.
10. All kinds of rubber pulp, latex, organic solvents, fillers.
11. Pump for tanker, barge clearance, absorb the sewage and residual oil in the warehouse.
12. Hops and baking powder, syrup, syrup, molasses.
13. Pump suction, mine, tunnel, tunnel, sewage, sediment.
14. A variety of special media suction.